Three years of building whole devices
For three years I built complete IoT devices: drivers, firmware, updates and the enclosure for CE. One Wi-Fi freezer monitor runs for a year on its battery.
From 2019 to 2022 I was an electronics engineer at DvM IoT Solutions. We built IoT devices, and I worked on every layer: drivers, firmware, updates and the enclosure.
When you build the whole device, everything is connected. Battery life depends on what the firmware does between readings. The enclosure decides whether the product passes CE.
A freezer monitor that lasts a year
I designed an ultra-low-power temperature monitor for freezers, on a Wi-Fi MCU. It reads its sensors over I2C and spends the rest of the time in deep sleep. I tuned that sleep until one battery lasted a year.
A vibration monitor that does its own FFT
For predictive maintenance, I built a vibration and temperature monitor on a Cortex-M MCU with NB-IoT. It runs an FFT on its own vibration data, checks the result against thresholds, and sends an alert over NB-IoT when one is crossed.
Drivers and an RTOS
On another Cortex-M MCU, I wrote modular low-level drivers and integrated analog and digital sensors for industrial automation. I moved the old communication stack onto an embedded RTOS, which made the Ethernet communication multithreaded and connected it to the cloud.
Updates and CE
The devices can take new firmware two ways: over the air, or over USB with the device in USB client mode.
I took part in CE certification, and designed the enclosure and a breakout board to meet the safety and EMI requirements.
Conclusion
A freezer monitor that runs a year on one battery, a vibration monitor that analyzes its own data, an old stack moved onto an RTOS, and an enclosure designed for CE.
Those years taught me to start from the hardware. Power, buses and radio set the limits the code has to live within.